GeneralCan I order one without the “BringIt” logo embossed on the outer skin? No. Do you have a third ramp? Not at this time. We are looking at the ability to add a third ramp to help with snowmobiles and other equipment. You can however buy an aftermarket ramp and keep it in the back of the truck until then. Does this change the inside dimensions of the box? No. There is no bed intrusion from the BringIt ToolGate. You have just as much room as you did with your factory tailgate. How long are the ramps? 52″. You are thinking: “That’s too short”. But hang on… The ramps are designed to fit INSIDE the tailgate. That means they can only be as long as the gate is wide. But, when attached to the Elongator Extension in the ramp loading position this gives you 6 foot ramps at an angle of 27 degrees. It is designed based on a 2 inch lift (standard OEM 4×4 lift). Anything higher than a standard lift will result in a steeper angle. But if you have a higher lift you are used to this already, right? Tell me about color matching By default, every BringIt™ Tailgate comes with a matt black skin. This skin is UV protected so it will not fade. But you do have the option of having it color matched for your truck. This is a very popular option If you select this option after the order is confirmed you will receive an email asking for your VIN. We use this number to determine the exact color your tailgate needs to be painted. As with any color match, results can vary based on the age of your truck. The older your truck is the more chance it has experienced some fade in the paint. We match to the factory color. There’s a slight chance that the tailgate will be a little brighter looking than the rest of your truck. The way to get the most perfect match is to order the tailgate unpainted and then have your local shop color match your tailgate specifically which will take into the account the paint fade. However, this means the tailgate has to be disassembled, painted and reassembled. The majority of our customers prefer having us paint the gate in advance so they can just put it on the truck and be done with it. How does the SwitchBack Camera system work? There are two cameras in the tailgate. One is the traditional backup camera that shows the bumper/trailer hitch view. When the tailgate is up, and the truck is in reverse, this camera is active. The second camera is at the top of the tailgate pointed towards the sky. When the tailgate is closed, this camera is off. When the tailgate is lowered past 45 degrees the traditional camera turns off and the “top” camera automatically activates. The camera display always shows the active camera. What trucks does the BringIt TOOLGate fit? CHEVY SILVERADO 1500 (2007-2018)CHEVY SILVERADO 1500 (2019-2023)CHEVY SILVERADO 2500/3500 (2007-2019)CHEVY SILVERADO 2500/3500 (2020-2023) DODGE RAM 1500/2500/3500 (2019-2023)DODGE RAM 1500 “CLASSIC” (2019-2023)DODGE RAM 1500/2500/3500 (2002-2018) FORD F-150 (2015-2022)FORD F-250/350 (2017-2022)FORD RANGER (2019-2021) GMC SIERRA 1500 (2007-2018)GMC SIERRA 1500 (2019-2023)GMC SIERRA 2500/3500 (2007-2019)GMC SIERRA 2500/3500 (2020-2023) Toyota Tundra (2010-2021) What is the BringIt Tailgate made of? Steel, stainless steel, and aluminum. The ramps are made out of aluminum. The rear skin, top, and side caps are made out of ABS. This material is lightweight and tough. It can also be easily painted. Can I order the BringIt Tailgate without ramps? No. The ramps are part of our integrated, multifunction system and “ride inside” every tailgate we make. Besides, you never know when you might need them. . And, with BringIt, you’ll always have them with you. When the BringIt Tailgate is closed do the ramps rattle when driving? Nope. The BringIt Tailgate has been engineered specifically to avoid any ramp rattling. The ramps nest together snugly in the ramp compartment. The extension then folds down to hold the ramps in even more tightly. Finally, the extension has been designed so that the bottom gets “pinched” between the back of the truck cargo bed and the bottom of the BringIt Tailgate. Nothing can move, nothing can rattle, nothing can fall out. Are there other options for the BringIt Tailgate? Yes – If your current truck has a backup camera you can have this as an option. Also, if you have a tailgate that remotely locks with your key fob you can order that as well. Each of these items come as a bundled option. If I don’t need the backup camera and remote lock option does that mean my tailgate will not lock? It will still lock. The basic BringIt Tailgate comes with a separate physical key that unlocks our handle. The REMOTE LOCK works with newer trucks that have an OEM key fob. Your BringIt Tailgate can still be locked regardless of the option you select. What are BringIt modules? BringIt modules are removable “accessories” that conveniently snap onto your BringIt Tailgate. Available modules will eventually include a gun or bow case, liquid containers for fuel or water, a tool box, a tackle box, a table, one for tailgating and more! Modules can be attached when you need them and easily removed when you don’t. And, they won’t interfere with the tailgate’s extension function. In fact, you’ll still be able to use the extension at the 210-degree position with the module in place. Plus, once your BringIt Tailgate is closed and locked the modules can not be removed or opened. How much load can the multifunction BringIt Tailgate carry? The tailgate is rated at 650 pounds. The ramps are rated at 700 pounds each. How do I install a multifunction BringIt Tailgate? Truck tailgates are fairly easy to remove (and, thus, to install). Below is the general procedure. Your truck may have more specific instructions. Remove the support cables from your existing tailgate. You will use them with your BringIt Tailgate. If there are any camera or remote lock cables, disconnect them. Drop the tailgate about 1/4 down. There is a spot on the hinge that allows you to remove it from the passenger side post first. Do so and then pop it off from the drivers’ side. Reverse the previous three steps to install the BringIt Tailgate. Reward yourself with a cold beverage of your choosing. Get used to people being even more envious of your truck.
Do you have a third ramp? Not at this time. We are looking at the ability to add a third ramp to help with snowmobiles and other equipment. You can however buy an aftermarket ramp and keep it in the back of the truck until then.
Does this change the inside dimensions of the box? No. There is no bed intrusion from the BringIt ToolGate. You have just as much room as you did with your factory tailgate.
How long are the ramps? 52″. You are thinking: “That’s too short”. But hang on… The ramps are designed to fit INSIDE the tailgate. That means they can only be as long as the gate is wide. But, when attached to the Elongator Extension in the ramp loading position this gives you 6 foot ramps at an angle of 27 degrees. It is designed based on a 2 inch lift (standard OEM 4×4 lift). Anything higher than a standard lift will result in a steeper angle. But if you have a higher lift you are used to this already, right?
Tell me about color matching By default, every BringIt™ Tailgate comes with a matt black skin. This skin is UV protected so it will not fade. But you do have the option of having it color matched for your truck. This is a very popular option If you select this option after the order is confirmed you will receive an email asking for your VIN. We use this number to determine the exact color your tailgate needs to be painted. As with any color match, results can vary based on the age of your truck. The older your truck is the more chance it has experienced some fade in the paint. We match to the factory color. There’s a slight chance that the tailgate will be a little brighter looking than the rest of your truck. The way to get the most perfect match is to order the tailgate unpainted and then have your local shop color match your tailgate specifically which will take into the account the paint fade. However, this means the tailgate has to be disassembled, painted and reassembled. The majority of our customers prefer having us paint the gate in advance so they can just put it on the truck and be done with it.
How does the SwitchBack Camera system work? There are two cameras in the tailgate. One is the traditional backup camera that shows the bumper/trailer hitch view. When the tailgate is up, and the truck is in reverse, this camera is active. The second camera is at the top of the tailgate pointed towards the sky. When the tailgate is closed, this camera is off. When the tailgate is lowered past 45 degrees the traditional camera turns off and the “top” camera automatically activates. The camera display always shows the active camera.
What trucks does the BringIt TOOLGate fit? CHEVY SILVERADO 1500 (2007-2018)CHEVY SILVERADO 1500 (2019-2023)CHEVY SILVERADO 2500/3500 (2007-2019)CHEVY SILVERADO 2500/3500 (2020-2023) DODGE RAM 1500/2500/3500 (2019-2023)DODGE RAM 1500 “CLASSIC” (2019-2023)DODGE RAM 1500/2500/3500 (2002-2018) FORD F-150 (2015-2022)FORD F-250/350 (2017-2022)FORD RANGER (2019-2021) GMC SIERRA 1500 (2007-2018)GMC SIERRA 1500 (2019-2023)GMC SIERRA 2500/3500 (2007-2019)GMC SIERRA 2500/3500 (2020-2023) Toyota Tundra (2010-2021)
What is the BringIt Tailgate made of? Steel, stainless steel, and aluminum. The ramps are made out of aluminum. The rear skin, top, and side caps are made out of ABS. This material is lightweight and tough. It can also be easily painted.
Can I order the BringIt Tailgate without ramps? No. The ramps are part of our integrated, multifunction system and “ride inside” every tailgate we make. Besides, you never know when you might need them. . And, with BringIt, you’ll always have them with you.
When the BringIt Tailgate is closed do the ramps rattle when driving? Nope. The BringIt Tailgate has been engineered specifically to avoid any ramp rattling. The ramps nest together snugly in the ramp compartment. The extension then folds down to hold the ramps in even more tightly. Finally, the extension has been designed so that the bottom gets “pinched” between the back of the truck cargo bed and the bottom of the BringIt Tailgate. Nothing can move, nothing can rattle, nothing can fall out.
Are there other options for the BringIt Tailgate? Yes – If your current truck has a backup camera you can have this as an option. Also, if you have a tailgate that remotely locks with your key fob you can order that as well. Each of these items come as a bundled option.
If I don’t need the backup camera and remote lock option does that mean my tailgate will not lock? It will still lock. The basic BringIt Tailgate comes with a separate physical key that unlocks our handle. The REMOTE LOCK works with newer trucks that have an OEM key fob. Your BringIt Tailgate can still be locked regardless of the option you select.
What are BringIt modules? BringIt modules are removable “accessories” that conveniently snap onto your BringIt Tailgate. Available modules will eventually include a gun or bow case, liquid containers for fuel or water, a tool box, a tackle box, a table, one for tailgating and more! Modules can be attached when you need them and easily removed when you don’t. And, they won’t interfere with the tailgate’s extension function. In fact, you’ll still be able to use the extension at the 210-degree position with the module in place. Plus, once your BringIt Tailgate is closed and locked the modules can not be removed or opened.
How much load can the multifunction BringIt Tailgate carry? The tailgate is rated at 650 pounds. The ramps are rated at 700 pounds each.
How do I install a multifunction BringIt Tailgate? Truck tailgates are fairly easy to remove (and, thus, to install). Below is the general procedure. Your truck may have more specific instructions. Remove the support cables from your existing tailgate. You will use them with your BringIt Tailgate. If there are any camera or remote lock cables, disconnect them. Drop the tailgate about 1/4 down. There is a spot on the hinge that allows you to remove it from the passenger side post first. Do so and then pop it off from the drivers’ side. Reverse the previous three steps to install the BringIt Tailgate. Reward yourself with a cold beverage of your choosing. Get used to people being even more envious of your truck.
